NW-103

Nonwovens Electrospinning System for Pilot Production

Adoption of PLC Control. High speed and uniform spinning of nanofibers with pipe/multijet spinnerets.

The model NW-103 is an electrospinning system to spin nonwovens sheets. With solutions suh as PVDF, PAN and PVA, nanofibes of which diameters are from several tens of nanometers to several micrometers can be spun using

Main Features

High speed spinning of nanofibers on the 850mm-wide belt

The NW-103 integrates spinnerets on 4 rows of rails and can spin 850mm-wide nanofiber sheets (effective width at 680mm).

PLC control enabling easy connection of Roll-to-Roll unit

With PLC (Programmable Logic Controller) control the interface with a user's equipment such as Roll-to-roll unir was made easier. Selection of pipe or multijet spinnerets for solutions to spin. A variety of solutions can be spun into nanofibers by selecting pipe spinnerets or multijet spinnerets (MJS).

Programmable left/right traversing and spinning distance

Left/right traversing distance and speed and spinning distance can be easily programmed.

100um or thicker membranes

Connection of a negative 10kV high voltage supply to the collector (conveyor belt) creates membranes of 100um or thicker. （Patented）

Use as a pilot production machine

By the combination of Roll-to-roll unit and/or an environmental controller the NW-103 can be used as a stand-alone system or a pilot production system.

Safety features and easy operation

Considering operators' safety , safety features such as a high voltage interlock, a door lock, strengthened glassglass, instant high voltage discharge, a prefilter and emergency switches are equipped. Parameters to spin nanofiber sheets can be easily programmed with a 10-key controller.